Tuesday, November 7, 2017

How to Make Metal Bend


One month ago, I attended the Applied Precognitive Project 2017 Fest in Las Vegas.  APP is a remote viewing group led by Marty Rosenblatt, a computational physicist, specialized in Associative Remote Viewing techniques used to predict financial outcomes.  A couple of days into the conference, Marty announced a "spoon bending party" and dumped a bag of assorted cutlery on the coffee table and told everyone to take a spoon or fork and try to make it bend.  He had decided to "up the ante" a bit, and had purchased a couple of 3/8" diameter foot long steel rods at Home Depot, to see if it might be possible to bend something as seemingly impossible as this. 

Since I had just been able to bend a silver-plated spoon a couple of days earlier, making it curl around its stem several times, I was ready for a greater challenge.  I grabbed one of the steel rods.  I realized as soon as I picked it up there was little likelihood this was ever going to bend - it  could not be dented with any amount of physical force with my hands.  After about ten minutes, suddenly the amazing moment happened and the rod began to "melt" in the center.  With a minimal amount of gentle pressure, I was able to immediately bend the rod in half.  It was an incredible and exhilarating moment for me.  I was astonished.  Actually, Marty was astonished.  It was patently unbelievable.  He videotaped by response seconds after doing this and has posted it on the APP website: http://www.appliedprecog.com/

How did I do this?  I can only say there is a moment when the metal begins to "melt" and in a brief window of time becomes malleable like soft clay.  Then the moment ends, and the metal reverts to its previous rigid consistency.  You have to immediately apply some gentle pressure before the window of opportunity closes.  To do this, it is important to set your intention to bend the item and then basically forget about it and let it operate by itself.  This is not easy since it involves getting rid of any expectations you may have for success.

A lot of folks have never heard of spoon bending.  When I was in college, I had two friends, a brother and sister, whose mother, Greta Woodrew, was one of the most famous "alien channelers" in the world.  She claimed to be in communication with aliens.  I heard all kinds of bizarre and unbelievable stories about her from her kids, both very serious, intelligent, straight-laced people, and also other mutual friends who were credible.  I never knew whether to believe the stories or not.  They involved various paranormal events - which I did not believe in at the time.  I got involved in the effort to bring their mother to speak at Princeton University at an unsanctioned student organization event.  The event was very successful. 

We brought her to have lunch at my eating club.  As we sat there, she asked me if I would like to see her bend a spoon.  I had never heard of spoon bending before and said, "Sure."  She held up one of the spoons from our table and I watched it bend in her hand.  To this day, I don't understand my reaction.  It was such a ridiculously impossible event that I dismissed it from my mind.  It made so sense, and therefore it could not exist for me. 

That was the end of that until I went to interview Uri Geller, the Israeli spoon bender who rose to worldwide fame in the 1970's, at his home in London.  I purposely did not bring a spoon or other item with me for him to bend.  I did not want him to feel like a one-trick pony.  However, he volunteered to show me, up close, how he bent a spoon while barely touching it.  I had already secretly asked a magician friend of mine to show me all the ways that magicians can appear to bend a spoon using magic tricks.  So I was fully prepared and knew what to look for.  He said it worked better when he was near something metal and so he walked over to the stove, then the refrigerator, until the spoon finally began to bend.  He merely stroked it.  I watched him like a hawk.  There was a millisecond in which he seemed to remove the spoon from my sight, and so I felt he had broken the proverbial chain of custody (a legal concept of evidentiary possession), and so I wasn't sure if he had taken the split second as an opportunity to cheat by bending the spoon with physical, not mental, force.  He also bent a spoon for my children that day and I saw his famous car covered with bent cutlery.  Uri's spoon bending appeared to be legitimate but I didn't understand how this could possibly work.

I only recently decided to attend a "spoon bending class" and was literally the last person in the entire class to achieve this feat.  I felt ashamed and depressed.  I reluctantly pulled out the last of 8 forks and it suddenly began to bend by itself.  Then, as I picked up each of the other 7 forks, they all bent effortlessly.  It was clearly a condensation of energy within that moment.  And it was life changing.  I learned, in very physical, psychokinetic terms, that the physical world is not what it appears to be!

Aeronautical engineer Jack Houck became somewhat famous in the 1980's for throwing what he called "spoon bending parties."  He claimed that by 1988, roughly 8,500 people had attended his parties and 85 percent had achieved at least what he called a "kindergarten level" ability to bend spoons.  I had never read his comments until researching for this blog.  I see that he actually talks about graduating to "high school level" of mental bending when you can bend the exact type and thickness of steel rod that Marty brought with him to the conference, and that I bent!  Jack wrote about his theory of why metal can bend on his website, http://www.jackhouck.com/pk.shtml:

"During my PK Party lecture I always show examples of high school bending. These are metal rods, typically 3/8" extruded aluminum rods, that have been formed into odd shapes, and steel rods, up to a half inch, that have been bent. Small ladies can bend the 1/2" rods. I even have some old fashioned hacksaw blades that have been formed into spirals. Usually, if too much physical force is applied to the old fashioned hacksaw blades, they break in multiple pieces because they are so brittle. At the PK Parties the hacksaw blades become pliable, annealed, in a similar process to when the silverware gets soft. I think that the dislocations in the grain boundaries of the metal act as transducers to some unknown form of energy. The mind establishes a link between this energy source and energy is dumped into the grain boundaries. The energy has nowhere to go so it turns into heat. This is the same process that happens with known energy that gets dumped inside of another material as with neutrons, x-rays, and microwaves. This heat melts the grain boundaries, and the metal feels like it has lost its structure because the grains inside the metal slip with respect to each other. The heat is transferred away from the grain boundaries by normal conduction, and eventually the "freezing" point of the metal is reached and the metal becomes hard again. "

Spoon bending is frequently taught in conjunction with remote viewing classes because it involves the relationship of the human mind to the environment, and the power of mind over matter.  It is an astonishingly powerful way to convince even devout materialists and skeptics that something novel is going on that displaces our traditional notions of physics and consciousness...





No comments:

Post a Comment